https://machinisttoolslathe.com Sat, 04 Apr 2026 23:26:45 +0000 en-US hourly 1 https://wordpress.org/?v=4.1.1 https://machinisttoolslathe.com/2025/12/07/lot-of-11-hardinge-5c-4-3-edc-lathe-step-chuck-collets-machinist-tooling-13b-2/ https://machinisttoolslathe.com/2025/12/07/lot-of-11-hardinge-5c-4-3-edc-lathe-step-chuck-collets-machinist-tooling-13b-2/#comments Mon, 08 Dec 2025 04:40:49 +0000 https://machinisttoolslathe.com/2025/12/07/lot-of-11-hardinge-5c-4-3-edc-lathe-step-chuck-collets-machinist-tooling-13b-2/



















For sale by Equipment Recycle is a Lot of 11 Hardinge 5c/4 Collets. This is a mixed lot of several different collets and several different sizes. Some of the collets do not have brands, types, or sizes listed on them. The ones with descriptors listed have the brand Hardinge. Some have 5c, 4, T21959X EE2018, and 3 EDC listed on them. They are in good used condition. Some of the collets may have some wear on them from use with the previous owner. One of the step collets has a chip in the side. Please see photographs for clarification. Please be sure to see our other listings for more Hardinge collets and tooling including a similar lot of 12 collets. Here is your chance to own this for a fraction of retail. 4 = Like New 3 = Good 2 = Poor-Fair 1 = As-Is. At Equipment Recycle we shoot for the stars. We want all 5 stars from you and will do what it takes to earn them. So before leaving feedback or low star ratings give a chance to correct any issue. Our feedback settings are automated. We believe that the customer comes first and we go above and beyond to correct any issue that may occur. We are a small family run equipment broker and consignment company. We offer a market analysis on your product and then give you the option to sell or consign your item with us. We believe that we can sell anything and there is no job or product to big. Let us sell your equipment and help you or your company grow. There is a large customer base out there just waiting to be reached and Equipment Recycle is the company to reach them for you. Let Equipment Recycle bring the world to you! Buyers without these will be subject to a lift gate charge. The sale of this item may be subject to regulation by the Food and Drug Administration and state and local regulatory agencies. Equipment Recycle is the consignee of most of the items we sell. Equipment Recycle has used its best efforts to inspect the item(s) for sale and create descriptions and furnish photographs that fairly and adequately depict the type, condition and image of the goods at the time of sale.

]]> https://machinisttoolslathe.com/2025/12/07/lot-of-11-hardinge-5c-4-3-edc-lathe-step-chuck-collets-machinist-tooling-13b-2/feed/ 0 https://machinisttoolslathe.com/2025/06/07/lot-of-12-hardinge-dunham-5c-4-lathe-step-chuck-collets-machinist-tooling-55d-2/ https://machinisttoolslathe.com/2025/06/07/lot-of-12-hardinge-dunham-5c-4-lathe-step-chuck-collets-machinist-tooling-55d-2/#comments Sat, 07 Jun 2025 17:09:48 +0000 https://machinisttoolslathe.com/2025/06/07/lot-of-12-hardinge-dunham-5c-4-lathe-step-chuck-collets-machinist-tooling-55d-2/






















For sale by Equipment Recycle is a Lot of 12 (Mixed) Hardinge Dunham 5C/4 Collets. This is a mixed lot of several different collets and several different sizes. Some of the collets do not have brands, types, or sizes listed on them. The ones with descriptors listed include the brands Hardinge and Dunham. Some have 5c, 4, T24449X listed on them. They are in good used condition. Some of the collets may have some wear on them from use with the previous owner. Please see photographs for clarification. Please be sure to see our other listings for more Hardinge collets and tooling including a similar lot of 11 collets. Here is your chance to own this for a fraction of retail. 4 = Like New 3 = Good 2 = Poor-Fair 1 = As-Is. At Equipment Recycle we shoot for the stars. We want all 5 stars from you and will do what it takes to earn them. So before leaving feedback or low star ratings give a chance to correct any issue. Our feedback settings are automated. We believe that the customer comes first and we go above and beyond to correct any issue that may occur. We are a small family run equipment broker and consignment company. We offer a market analysis on your product and then give you the option to sell or consign your item with us. We believe that we can sell anything and there is no job or product to big. Let us sell your equipment and help you or your company grow. There is a large customer base out there just waiting to be reached and Equipment Recycle is the company to reach them for you. Let Equipment Recycle bring the world to you! Buyers without these will be subject to a lift gate charge. The sale of this item may be subject to regulation by the Food and Drug Administration and state and local regulatory agencies. Equipment Recycle is the consignee of most of the items we sell. Equipment Recycle has used its best efforts to inspect the item(s) for sale and create descriptions and furnish photographs that fairly and adequately depict the type, condition and image of the goods at the time of sale.

]]> https://machinisttoolslathe.com/2025/06/07/lot-of-12-hardinge-dunham-5c-4-lathe-step-chuck-collets-machinist-tooling-55d-2/feed/ 0 https://machinisttoolslathe.com/2025/03/26/x-very-rare-hardinge-5sc-20pc-machinist-lathe-step-collet-set-vgc-usa/ https://machinisttoolslathe.com/2025/03/26/x-very-rare-hardinge-5sc-20pc-machinist-lathe-step-collet-set-vgc-usa/#comments Wed, 26 Mar 2025 14:22:42 +0000 https://machinisttoolslathe.com/2025/03/26/x-very-rare-hardinge-5sc-20pc-machinist-lathe-step-collet-set-vgc-usa/







FEEL FREE TO ASK ANY QUESTIONS YOU MAY HAVE.

]]> https://machinisttoolslathe.com/2025/03/26/x-very-rare-hardinge-5sc-20pc-machinist-lathe-step-collet-set-vgc-usa/feed/ 0 https://machinisttoolslathe.com/2025/03/09/machinist-lathe-tool-6-5-4-3-5c-step-collet-nos-japan/ https://machinisttoolslathe.com/2025/03/09/machinist-lathe-tool-6-5-4-3-5c-step-collet-nos-japan/#comments Mon, 10 Mar 2025 01:49:43 +0000 https://machinisttoolslathe.com/2025/03/09/machinist-lathe-tool-6-5-4-3-5c-step-collet-nos-japan/







For sale is a 6 ” 5″ 4″ 3″ 5c Step Collet (NOS) Japan all have packing grease on them. The collets have been in storage close to 40 years. The 3/5/6 boxes say Japan, the 4 says MEDA Import. Please view all pics as they are part of the description. I try to describe most of the items to the best of my ability, there are times when hubby inserts info onto a Post-It-Note that you will see in the pics. Please view all pics, as they are part of the description, this also applies to my “odds & ends” and “Lot of” items, as it is too time-consuming to describe each and every item. As long as I can package the tools safely, I’ll combine everything as cost-effective as possible. Please do NOT pay me until I send you a combined invoice (if applicable). We don’t go to the post office daily!

]]> https://machinisttoolslathe.com/2025/03/09/machinist-lathe-tool-6-5-4-3-5c-step-collet-nos-japan/feed/ 0 https://machinisttoolslathe.com/2024/10/04/3-steel-step-collets-5c-3-4-6-fixture-mount-machinist-toolmaker-lathe-lot202/ https://machinisttoolslathe.com/2024/10/04/3-steel-step-collets-5c-3-4-6-fixture-mount-machinist-toolmaker-lathe-lot202/#comments Sat, 05 Oct 2024 04:40:01 +0000 https://machinisttoolslathe.com/2024/10/04/3-steel-step-collets-5c-3-4-6-fixture-mount-machinist-toolmaker-lathe-lot202/















Video tool box tours of upcoming auctions. Videos in some listings will show repairs & refurbishment. Known issues will be shown in the pictures &/or title. Please message me with any concerns. I stand behind my words, and I will make it right. Best offers are NOT accepted! Wait for your Toolcycle invoice before you pay. Pay for your items without a combined invoice. Every item is packed to arrive safely, read our reviews. From my shop to yours.

]]> https://machinisttoolslathe.com/2024/10/04/3-steel-step-collets-5c-3-4-6-fixture-mount-machinist-toolmaker-lathe-lot202/feed/ 0 https://machinisttoolslathe.com/2024/07/08/antique-lathe-head-stock-tail-stock-step-pulley-collectible-machinist-part-lot/ https://machinisttoolslathe.com/2024/07/08/antique-lathe-head-stock-tail-stock-step-pulley-collectible-machinist-part-lot/#comments Mon, 08 Jul 2024 08:24:06 +0000 https://machinisttoolslathe.com/2024/07/08/antique-lathe-head-stock-tail-stock-step-pulley-collectible-machinist-part-lot/







Estate find, as found, uncleaned, UNTESTED; turns freely; early brazes & welds; weighs 30 pounds; for parts or repair, rust, wear, dents, dings, miss matched parts, early repairs possible, chips, please see all pictures, needs clean up from long storage, AS IS AS SHOWN, location Z4. Please see my other listings for mechanics, machinists, logging, steampunk items, pulleys, hardware, garden cultivators, and tools; primitives, and more. We will be liquidating a large estate consisting of military items, woodworking tools, automotive tools, machinists tools, mechanics tools, collectibles, antique and primitives and more. Please put us in your favorites you will not be disappointed. I will try to describe these items to the best of my ability and would not misrepresent anything intentionally. I list the defects, problems and imperfections I see on the items, but I can sometimes miss something or make a mistake. I try to answer every question asked, but cannot guarantee an answer if you ask the day the listing ends. ALSO PLEASE DO NOT ASK US TO SHOW AS A GIFT OR MISREPRESENT THE CONTENTS OR VALUE. Track Page Views With. Auctiva’s FREE Counter.

]]> https://machinisttoolslathe.com/2024/07/08/antique-lathe-head-stock-tail-stock-step-pulley-collectible-machinist-part-lot/feed/ 0 https://machinisttoolslathe.com/2024/06/26/hardinge-5c-5-step-collet-lathe-chucker-chuck-machinist-tool-brand-new/ https://machinisttoolslathe.com/2024/06/26/hardinge-5c-5-step-collet-lathe-chucker-chuck-machinist-tool-brand-new/#comments Wed, 26 Jun 2024 19:21:43 +0000 https://machinisttoolslathe.com/2024/06/26/hardinge-5c-5-step-collet-lathe-chucker-chuck-machinist-tool-brand-new/





Hardinge 5C 5 Step Collet Lathe Chucker Chuck Machinist Tools Brand New. We have large quantity of 5C Collets. Our 20,000 Sqft Warehouse in Oxnard, CA is always full of Machine tools & accessories for Lathes, Mills & Grinders. Carbide Inserts made by ISCAR, SANDVIK, KENNAMETAL. Tool Holders, HSS & Carbide End Mills, Taps and more. We will get back to you shortly. Send us a message.

]]> https://machinisttoolslathe.com/2024/06/26/hardinge-5c-5-step-collet-lathe-chucker-chuck-machinist-tool-brand-new/feed/ 0 https://machinisttoolslathe.com/2024/04/29/vintage-machinist-right-angle-plate-holes-step-block-set-up-tool-maker-jig/ https://machinisttoolslathe.com/2024/04/29/vintage-machinist-right-angle-plate-holes-step-block-set-up-tool-maker-jig/#comments Tue, 30 Apr 2024 00:50:57 +0000 https://machinisttoolslathe.com/2024/04/29/vintage-machinist-right-angle-plate-holes-step-block-set-up-tool-maker-jig/












Step Block Set Up Tool Maker Jig. Watchmaker CNC Machinist Metal Shop. You are looking at a nice estate find, as found and for sale here. Large Machinist shop, lathe tools, precision tools, etc is being liquidated daily, look for new listings ongoing. Or shoot me a respectable offer! … I offer no guarantees on items, just like a yard sale… Take it as it is. Ask questions if needed before sale… Make all reasonable offers, worth is subjective. Measurements shown, if in pics. Will be packaged securely and safely… Check out my other items. Be sure to add me to your favorites list. This item is part of an estate liquidation sale. All efforts will be made to disclose defects, with pictures and observations, however, please consider we are not experts and may not catch everything. We do not clean or refurbish any of our items due to the many differences of opinion on cleaning techniques, or original state items, and the sheer volume of items we process. All our items come from many different uncontrollable environments, and may have stains and odors… I can’t smell very good after decades of exposure to many different odors. The free listing tool.

]]> https://machinisttoolslathe.com/2024/04/29/vintage-machinist-right-angle-plate-holes-step-block-set-up-tool-maker-jig/feed/ 0 https://machinisttoolslathe.com/2024/04/27/bench-lathe-headstock-step-pully-watchmaker-cnc-machinist-metal-shop/ https://machinisttoolslathe.com/2024/04/27/bench-lathe-headstock-step-pully-watchmaker-cnc-machinist-metal-shop/#comments Sat, 27 Apr 2024 12:40:13 +0000 https://machinisttoolslathe.com/2024/04/27/bench-lathe-headstock-step-pully-watchmaker-cnc-machinist-metal-shop/

















CNC Mill Metal Worker. You are looking at a nice estate find, as found and for sale here. Large Machinist shop, lathe tools, precision tools, etc is being liquidated daily, look for new listings ongoing. Unmarked other than number 981 found. Early E Rivett Lathe bed was found bolted to a bench and appeared to have been in use complete with Bed, Headstock, Tailstock, Cross slide, Power Hacksaw, countershaft and electric motor. Make offers on each piece if you would like the complete unit while they last. Or shoot me a respectable offer! … I offer no guarantees on items, just like a yard sale… Take it as it is. Ask questions if needed before sale… Make all reasonable offers, worth is subjective. Measurements shown, if in pics. Will be packaged securely and safely… Check out my other items. Be sure to add me to your favorites list. This item is part of an estate liquidation sale. All efforts will be made to disclose defects, with pictures and observations, however, please consider we are not experts and may not catch everything. We do not clean or refurbish any of our items due to the many differences of opinion on cleaning techniques, or original state items, and the sheer volume of items we process. All our items come from many different uncontrollable environments, and may have stains and odors… I can’t smell very good after decades of exposure to many different odors. The free listing tool.

]]> https://machinisttoolslathe.com/2024/04/27/bench-lathe-headstock-step-pully-watchmaker-cnc-machinist-metal-shop/feed/ 0 https://machinisttoolslathe.com/2024/03/13/vtg-machinist-jeweler-lathe-countershaft-step-pully-8-sanding-plate-craftsman/ https://machinisttoolslathe.com/2024/03/13/vtg-machinist-jeweler-lathe-countershaft-step-pully-8-sanding-plate-craftsman/#comments Wed, 13 Mar 2024 09:24:36 +0000 https://machinisttoolslathe.com/2024/03/13/vtg-machinist-jeweler-lathe-countershaft-step-pully-8-sanding-plate-craftsman/













Lathe Countershaft with Bearings. You are looking at a nice estate find, as found and for sale here. Large Machinist shop, lathe tools, precision tools, etc is being liquidated daily, look for new listings ongoing. Found in a tool box with similar items, parts pieces underneath a lathe table in a large metal shop. All being listed separate or in lots shown. Or if not, shoot me a respectable offer with the make offer button! … I’m fair, and have no idea the value of these but gotta start somewhere. I offer no guarantees on items, just like a yard sale… Take it as it is. Ask questions if needed before sale… Make all reasonable offers, worth is subjective. Measurements shown, if in pics. Will be packaged securely and safely… Check out my other items. Be sure to add me to your favorites list. This item is part of an estate liquidation sale. All efforts will be made to disclose defects, with pictures and observations, however, please consider we are not experts and may not catch everything. We do not clean or refurbish any of our items due to the many differences of opinion on cleaning techniques, or original state items, and the sheer volume of items we process. All our items come from many different uncontrollable environments, and may have stains and odors… I can’t smell very good after decades of exposure to many different odors. The free listing tool.

]]> https://machinisttoolslathe.com/2024/03/13/vtg-machinist-jeweler-lathe-countershaft-step-pully-8-sanding-plate-craftsman/feed/ 0