https://machinisttoolslathe.com Wed, 16 Sep 2026 19:49:46 +0000 en-US hourly 1 https://wordpress.org/?v=4.1.1 https://machinisttoolslathe.com/2026/08/28/ames-precision-watch-clock-jewelers-lathe-feet-hold-down-machinist-parts-lot/ https://machinisttoolslathe.com/2026/08/28/ames-precision-watch-clock-jewelers-lathe-feet-hold-down-machinist-parts-lot/#comments Fri, 28 Aug 2026 19:11:40 +0000 https://machinisttoolslathe.com/2026/08/28/ames-precision-watch-clock-jewelers-lathe-feet-hold-down-machinist-parts-lot/






Estate find, as found, uncleaned; you get all; 4″ tall, 6″ top, 4″ x 3″ bottom on the two stands; rust, wear, damage, owners marks, please see all photos, need clean up from long storage, AS IS AS SHOWN, location B6. Please see my other listings for mechanics, machinists, logging, steampunk items, pulleys, hardware, garden cultivators, and tools; primitives, and more. We will be liquidating a large estate consisting of military items, woodworking tools, automotive tools, machinists tools, mechanics tools, collectibles, antique and primitives and more. Please put us in your favorites you will not be disappointed. I will try to describe these items to the best of my ability and would not misrepresent anything intentionally. I list the defects, problems and imperfections I see on the items, but I can sometimes miss something or make a mistake. I try to answer every question asked, but cannot guarantee an answer if you ask the day the listing ends. ALSO PLEASE DO NOT ASK US TO SHOW AS A GIFT OR MISREPRESENT THE CONTENTS OR VALUE. Track Page Views With. Auctiva’s FREE Counter.

]]> https://machinisttoolslathe.com/2026/08/28/ames-precision-watch-clock-jewelers-lathe-feet-hold-down-machinist-parts-lot/feed/ 0 https://machinisttoolslathe.com/2026/08/25/hendey-lathe-parts-no-6-collet-chucks-lathe-mill-collet-set-machinists-tools-2/ https://machinisttoolslathe.com/2026/08/25/hendey-lathe-parts-no-6-collet-chucks-lathe-mill-collet-set-machinists-tools-2/#comments Tue, 25 Aug 2026 07:04:44 +0000 https://machinisttoolslathe.com/2026/08/25/hendey-lathe-parts-no-6-collet-chucks-lathe-mill-collet-set-machinists-tools-2/














1920 antique machinists lathe collet chucks.

]]> https://machinisttoolslathe.com/2026/08/25/hendey-lathe-parts-no-6-collet-chucks-lathe-mill-collet-set-machinists-tools-2/feed/ 0 https://machinisttoolslathe.com/2026/08/01/vintage-g-boley-machinist-or-watch-maker-lathe-cast-iron-handwheel-parts/ https://machinisttoolslathe.com/2026/08/01/vintage-g-boley-machinist-or-watch-maker-lathe-cast-iron-handwheel-parts/#comments Sat, 01 Aug 2026 06:14:49 +0000 https://machinisttoolslathe.com/2026/08/01/vintage-g-boley-machinist-or-watch-maker-lathe-cast-iron-handwheel-parts/

























I’m not really familiar with these lathes and parts so I’ll let the photos speak for themselves. Please view all 24 photos for measurements and condition.

]]> https://machinisttoolslathe.com/2026/08/01/vintage-g-boley-machinist-or-watch-maker-lathe-cast-iron-handwheel-parts/feed/ 0 https://machinisttoolslathe.com/2026/07/10/hendey-lathe-parts-no-3-collet-chucks-lathe-mill-collet-set-machinists-tools/ https://machinisttoolslathe.com/2026/07/10/hendey-lathe-parts-no-3-collet-chucks-lathe-mill-collet-set-machinists-tools/#comments Fri, 10 Jul 2026 05:26:17 +0000 https://machinisttoolslathe.com/2026/07/10/hendey-lathe-parts-no-3-collet-chucks-lathe-mill-collet-set-machinists-tools/




HENDY NO 6 COLLET SET.

]]> https://machinisttoolslathe.com/2026/07/10/hendey-lathe-parts-no-3-collet-chucks-lathe-mill-collet-set-machinists-tools/feed/ 0 https://machinisttoolslathe.com/2026/06/25/lathe-milling-machine-machinist-tooling-parts-pieces-cutting-reamer-bits/ https://machinisttoolslathe.com/2026/06/25/lathe-milling-machine-machinist-tooling-parts-pieces-cutting-reamer-bits/#comments Thu, 25 Jun 2026 16:47:57 +0000 https://machinisttoolslathe.com/2026/06/25/lathe-milling-machine-machinist-tooling-parts-pieces-cutting-reamer-bits/

























Lathe Milling machine machinist tooling &parts pieces cutting reamer bits. BORES, COUNTER BORES, CUTTING TOOLS, TAP DIES, REAMERS, COUNTER SINK. LOOK AT ALL THE PHOTOS PART OF THE DESCRIPTION.

]]> https://machinisttoolslathe.com/2026/06/25/lathe-milling-machine-machinist-tooling-parts-pieces-cutting-reamer-bits/feed/ 0 https://machinisttoolslathe.com/2026/06/21/gunsmithing-tools-gun-parts-storage-machinist-chest-with-drawers-hardware-screw/ https://machinisttoolslathe.com/2026/06/21/gunsmithing-tools-gun-parts-storage-machinist-chest-with-drawers-hardware-screw/#comments Sun, 21 Jun 2026 16:38:41 +0000 https://machinisttoolslathe.com/2026/06/21/gunsmithing-tools-gun-parts-storage-machinist-chest-with-drawers-hardware-screw/






Gunsmith quality gun parts storage and gunsmithing accessories, tools and oddities of sorts. They stack up nicely on each other. Two hardware wooden drawers with slots for those small screws and springs and things. Some dividers were broken in the top drawer I believe only two slots but they can be glued back up but I never had the time. The very top machinist chest is a great lathe tool storage. All storage is very well made, not perfect, but storage I had the pleasure in using. Keep a gunsmith shop safety in one of the drawers for those just in case moments. I never wanted to invest in storage when I got started smithing, but later on I learned organisation was worth every pence to my pound. Adds a classic shop look, more traditional than lots of plastic storage everywhere. Other forms of storage hints the impression of auto shop garage or industrial building shop with metal chest and drawers and plastic this and that cantankerous containers. Make your shop into a living art form with a touch or wood and hints of traditional organisation. The whole stands shoulder or armpit high depending on one’s height. You get just the storage not the tools. Nothing including but the two drawer assemblies and the top chest. Same for the just the two bottom hardware drawers.

]]> https://machinisttoolslathe.com/2026/06/21/gunsmithing-tools-gun-parts-storage-machinist-chest-with-drawers-hardware-screw/feed/ 0 https://machinisttoolslathe.com/2026/03/29/large-lot-of-lathe-chuck-jaws-for-3-jaw-machinist-tools-tooling-parts-hold-downs-2/ https://machinisttoolslathe.com/2026/03/29/large-lot-of-lathe-chuck-jaws-for-3-jaw-machinist-tools-tooling-parts-hold-downs-2/#comments Sun, 29 Mar 2026 08:22:50 +0000 https://machinisttoolslathe.com/2026/03/29/large-lot-of-lathe-chuck-jaws-for-3-jaw-machinist-tools-tooling-parts-hold-downs-2/

























This 15 piece set of lathe chuck jaws and hold downs is specifically designed for 3 jaw lathe chucks. The high-quality materials ensure durability and precise clamping for a variety of workpieces. Perfect for CNC machining, metalworking, and manufacturing, this set provides the necessary components to securely hold and center workpieces for efficient and accurate machining.

]]> https://machinisttoolslathe.com/2026/03/29/large-lot-of-lathe-chuck-jaws-for-3-jaw-machinist-tools-tooling-parts-hold-downs-2/feed/ 0 https://machinisttoolslathe.com/2026/01/29/large-lot-of-lathe-chuck-jaws-for-3-jaw-machinist-tools-tooling-parts-hold-downs/ https://machinisttoolslathe.com/2026/01/29/large-lot-of-lathe-chuck-jaws-for-3-jaw-machinist-tools-tooling-parts-hold-downs/#comments Thu, 29 Jan 2026 06:52:14 +0000 https://machinisttoolslathe.com/2026/01/29/large-lot-of-lathe-chuck-jaws-for-3-jaw-machinist-tools-tooling-parts-hold-downs/

























This 15 piece set of lathe chuck jaws and hold downs is specifically designed for 3 jaw lathe chucks. The high-quality materials ensure durability and precise clamping for a variety of workpieces. Perfect for CNC machining, metalworking, and manufacturing, this set provides the necessary components to securely hold and center workpieces for efficient and accurate machining.

]]> https://machinisttoolslathe.com/2026/01/29/large-lot-of-lathe-chuck-jaws-for-3-jaw-machinist-tools-tooling-parts-hold-downs/feed/ 0 https://machinisttoolslathe.com/2026/01/13/machinist-lathe-mill-machinist-lot-of-lathe-chuck-bodies-parts-35-total-pieces/ https://machinisttoolslathe.com/2026/01/13/machinist-lathe-mill-machinist-lot-of-lathe-chuck-bodies-parts-35-total-pieces/#comments Tue, 13 Jan 2026 06:04:53 +0000 https://machinisttoolslathe.com/2026/01/13/machinist-lathe-mill-machinist-lot-of-lathe-chuck-bodies-parts-35-total-pieces/















The product is a lot of 35 lathe chuck bodies and parts for a machinist lathe mill. These pieces are essential components for precision machining and are designed for use with lathes. Constructed with quality materials, this assortment of chuck bodies and parts is ideal for machinists looking to repair or upgrade their lathes. Perfect for collectors or professionals looking to enhance their machining capabilities. Please check out the pictures included and ask questions if you have them.

]]> https://machinisttoolslathe.com/2026/01/13/machinist-lathe-mill-machinist-lot-of-lathe-chuck-bodies-parts-35-total-pieces/feed/ 0 https://machinisttoolslathe.com/2025/09/19/machinist-stbkcs-lathe-mill-machinist-set-of-2-micro-small-v-blocks-and-parts/ https://machinisttoolslathe.com/2025/09/19/machinist-stbkcs-lathe-mill-machinist-set-of-2-micro-small-v-blocks-and-parts/#comments Sat, 20 Sep 2025 00:45:49 +0000 https://machinisttoolslathe.com/2025/09/19/machinist-stbkcs-lathe-mill-machinist-set-of-2-micro-small-v-blocks-and-parts/

















The pictures show all that is included and the condition so please look close. Please see my other auctions for more tools items from a local estate. I tried to take photos of the parts that came with it. PLEASE SEE THE PHOTOS FOR THE BEST DESCRIPTION. PLEASE KNOW THAT I TRY TO SATISFY ANY AND ALL OF MY CUSTOMERS. I ANSWER ALL EMAILS AND WILL TRY TO WORK WITH YOU AS BEST I CAN. I WILL, HOWEVER, NOT BE BULLIED OR BLACKMAILED.

]]> https://machinisttoolslathe.com/2025/09/19/machinist-stbkcs-lathe-mill-machinist-set-of-2-micro-small-v-blocks-and-parts/feed/ 0