https://machinisttoolslathe.com Fri, 25 Sep 2026 08:06:40 +0000 en-US hourly 1 https://wordpress.org/?v=4.1.1 https://machinisttoolslathe.com/2026/09/19/thread-dial-metal-lathe-threading-start-gage-gauge-machinist-tool-tpi-dial-jet-3/ https://machinisttoolslathe.com/2026/09/19/thread-dial-metal-lathe-threading-start-gage-gauge-machinist-tool-tpi-dial-jet-3/#comments Sat, 19 Sep 2026 19:55:42 +0000 https://machinisttoolslathe.com/2026/09/19/thread-dial-metal-lathe-threading-start-gage-gauge-machinist-tool-tpi-dial-jet-3/












If you need more measurements please send what you need and get an answer before ordering. Be sure to view our other items for more great tooling finds.

]]> https://machinisttoolslathe.com/2026/09/19/thread-dial-metal-lathe-threading-start-gage-gauge-machinist-tool-tpi-dial-jet-3/feed/ 0 https://machinisttoolslathe.com/2026/09/19/metal-lathe-tooling-lot-machinist-tool-maker-box-find-chuck-jaws-boring-bar-turn-28/ https://machinisttoolslathe.com/2026/09/19/metal-lathe-tooling-lot-machinist-tool-maker-box-find-chuck-jaws-boring-bar-turn-28/#comments Sat, 19 Sep 2026 07:54:48 +0000 https://machinisttoolslathe.com/2026/09/19/metal-lathe-tooling-lot-machinist-tool-maker-box-find-chuck-jaws-boring-bar-turn-28/





















Tape measure not included. Be sure to view our other items for more great tooling finds.

]]> https://machinisttoolslathe.com/2026/09/19/metal-lathe-tooling-lot-machinist-tool-maker-box-find-chuck-jaws-boring-bar-turn-28/feed/ 0 https://machinisttoolslathe.com/2026/09/14/older-metal-lathe-faceplate-with-l-1-mount-machinist-tooling-2/ https://machinisttoolslathe.com/2026/09/14/older-metal-lathe-faceplate-with-l-1-mount-machinist-tooling-2/#comments Mon, 14 Sep 2026 19:45:43 +0000 https://machinisttoolslathe.com/2026/09/14/older-metal-lathe-faceplate-with-l-1-mount-machinist-tooling-2/













THERE ARE MEASUREMENTS IN THE PICTURES. NO CRACKS OR REPAIRS FOUND. THERE ARE SCUFFS, SCRATCHES AND WEAR FROM USE. CHECK OUT MY OTHER LISTINGS. NO WARRANTIES GIVEN OR IMPLIED. International Buyers – Please Note. I do not mark merchandise values below value or mark items as “gifts” – US and International government regulations prohibit such behavior.

]]> https://machinisttoolslathe.com/2026/09/14/older-metal-lathe-faceplate-with-l-1-mount-machinist-tooling-2/feed/ 0 https://machinisttoolslathe.com/2026/09/09/hardinge-elgin-metal-lathe-3c-collet-draw-bar-watchmaker-jeweler-machinist-tool-2/ https://machinisttoolslathe.com/2026/09/09/hardinge-elgin-metal-lathe-3c-collet-draw-bar-watchmaker-jeweler-machinist-tool-2/#comments Wed, 09 Sep 2026 19:35:41 +0000 https://machinisttoolslathe.com/2026/09/09/hardinge-elgin-metal-lathe-3c-collet-draw-bar-watchmaker-jeweler-machinist-tool-2/










Be sure to view our other items for more great tooling finds.

]]> https://machinisttoolslathe.com/2026/09/09/hardinge-elgin-metal-lathe-3c-collet-draw-bar-watchmaker-jeweler-machinist-tool-2/feed/ 0 https://machinisttoolslathe.com/2026/09/07/thread-dial-metal-lathe-threading-start-gage-gauge-machinist-tool-tpi-dial-jet-2/ https://machinisttoolslathe.com/2026/09/07/thread-dial-metal-lathe-threading-start-gage-gauge-machinist-tool-tpi-dial-jet-2/#comments Mon, 07 Sep 2026 19:31:43 +0000 https://machinisttoolslathe.com/2026/09/07/thread-dial-metal-lathe-threading-start-gage-gauge-machinist-tool-tpi-dial-jet-2/












If you need more measurements please send what you need and get an answer before ordering. Be sure to view our other items for more great tooling finds.

]]> https://machinisttoolslathe.com/2026/09/07/thread-dial-metal-lathe-threading-start-gage-gauge-machinist-tool-tpi-dial-jet-2/feed/ 0 https://machinisttoolslathe.com/2026/09/04/17-clausing-cohlchester-steady-rest-metal-lathe-accessory-tooling-machinist/ https://machinisttoolslathe.com/2026/09/04/17-clausing-cohlchester-steady-rest-metal-lathe-accessory-tooling-machinist/#comments Fri, 04 Sep 2026 07:24:43 +0000 https://machinisttoolslathe.com/2026/09/04/17-clausing-cohlchester-steady-rest-metal-lathe-accessory-tooling-machinist/














Double check your measurements before ordering but i personally pulled this off of a 17 Clausing lathe and it had the tag on it marking this as well. Be sure to view our other items for more great tooling finds.

]]> https://machinisttoolslathe.com/2026/09/04/17-clausing-cohlchester-steady-rest-metal-lathe-accessory-tooling-machinist/feed/ 0 https://machinisttoolslathe.com/2026/09/02/metal-lathe-tooling-lot-machinist-tool-maker-box-find-chuck-jaws-boring-bar-turn-27/ https://machinisttoolslathe.com/2026/09/02/metal-lathe-tooling-lot-machinist-tool-maker-box-find-chuck-jaws-boring-bar-turn-27/#comments Wed, 02 Sep 2026 19:21:45 +0000 https://machinisttoolslathe.com/2026/09/02/metal-lathe-tooling-lot-machinist-tool-maker-box-find-chuck-jaws-boring-bar-turn-27/





















Tape measure not included. Be sure to view our other items for more great tooling finds.

]]> https://machinisttoolslathe.com/2026/09/02/metal-lathe-tooling-lot-machinist-tool-maker-box-find-chuck-jaws-boring-bar-turn-27/feed/ 0 https://machinisttoolslathe.com/2026/09/01/hardinge-elgin-metal-lathe-3c-collet-draw-bar-watchmaker-jeweler-machinist-tool/ https://machinisttoolslathe.com/2026/09/01/hardinge-elgin-metal-lathe-3c-collet-draw-bar-watchmaker-jeweler-machinist-tool/#comments Tue, 01 Sep 2026 19:19:42 +0000 https://machinisttoolslathe.com/2026/09/01/hardinge-elgin-metal-lathe-3c-collet-draw-bar-watchmaker-jeweler-machinist-tool/










Be sure to view our other items for more great tooling finds.

]]> https://machinisttoolslathe.com/2026/09/01/hardinge-elgin-metal-lathe-3c-collet-draw-bar-watchmaker-jeweler-machinist-tool/feed/ 0 https://machinisttoolslathe.com/2026/08/31/metal-lathe-boring-bar-tool-post-machinist-tool-maker-box-find-38-12-34-1-2/ https://machinisttoolslathe.com/2026/08/31/metal-lathe-boring-bar-tool-post-machinist-tool-maker-box-find-38-12-34-1-2/#comments Mon, 31 Aug 2026 07:16:46 +0000 https://machinisttoolslathe.com/2026/08/31/metal-lathe-boring-bar-tool-post-machinist-tool-maker-box-find-38-12-34-1-2/
















Metal lathe boring bar tool post that holds 4 sizes of boring bars. Be sure to view our other items for more great tooling finds.

]]> https://machinisttoolslathe.com/2026/08/31/metal-lathe-boring-bar-tool-post-machinist-tool-maker-box-find-38-12-34-1-2/feed/ 0 https://machinisttoolslathe.com/2026/08/23/thread-dial-metal-lathe-threading-start-gage-gauge-machinist-tool-tpi-dial-jet/ https://machinisttoolslathe.com/2026/08/23/thread-dial-metal-lathe-threading-start-gage-gauge-machinist-tool-tpi-dial-jet/#comments Sun, 23 Aug 2026 19:01:43 +0000 https://machinisttoolslathe.com/2026/08/23/thread-dial-metal-lathe-threading-start-gage-gauge-machinist-tool-tpi-dial-jet/












If you need more measurements please send what you need and get an answer before ordering. Be sure to view our other items for more great tooling finds.

]]> https://machinisttoolslathe.com/2026/08/23/thread-dial-metal-lathe-threading-start-gage-gauge-machinist-tool-tpi-dial-jet/feed/ 0