https://machinisttoolslathe.com Fri, 22 May 2026 15:25:43 +0000 en-US hourly 1 https://wordpress.org/?v=4.1.1 https://machinisttoolslathe.com/2026/04/16/stark-tool-co-waltham-mass-machinists-bench-lathes-catalog-1900-edition-2/ https://machinisttoolslathe.com/2026/04/16/stark-tool-co-waltham-mass-machinists-bench-lathes-catalog-1900-edition-2/#comments Thu, 16 Apr 2026 11:56:44 +0000 https://machinisttoolslathe.com/2026/04/16/stark-tool-co-waltham-mass-machinists-bench-lathes-catalog-1900-edition-2/


A MACHINIST’S BENCH LATHES CATALOG by the Stark Tool Company, Waltham, Massachusetts. This 1900 Edition of 40 pages measures 9″ tall by 5 3/4″ wide. It illustrates the entire line of large and small lathes and accessories then manufactured by this company. Length = 8.88 Inches Ref.

]]> https://machinisttoolslathe.com/2026/04/16/stark-tool-co-waltham-mass-machinists-bench-lathes-catalog-1900-edition-2/feed/ 0 https://machinisttoolslathe.com/2025/12/17/stark-tool-co-waltham-mass-machinists-bench-lathes-catalog-1900-edition/ https://machinisttoolslathe.com/2025/12/17/stark-tool-co-waltham-mass-machinists-bench-lathes-catalog-1900-edition/#comments Wed, 17 Dec 2025 17:02:41 +0000 https://machinisttoolslathe.com/2025/12/17/stark-tool-co-waltham-mass-machinists-bench-lathes-catalog-1900-edition/


A MACHINIST’S BENCH LATHES CATALOG by the Stark Tool Company, Waltham, Massachusetts. This 1900 Edition of 40 pages measures 9″ tall by 5 3/4″ wide. It illustrates the entire line of large and small lathes and accessories then manufactured by this company. Length = 8.88 Inches Ref.

]]> https://machinisttoolslathe.com/2025/12/17/stark-tool-co-waltham-mass-machinists-bench-lathes-catalog-1900-edition/feed/ 0 https://machinisttoolslathe.com/2019/11/19/antique-1800s-p-blaisdell-worcester-mass-wood-lathe-machinist-metal-lathe/ https://machinisttoolslathe.com/2019/11/19/antique-1800s-p-blaisdell-worcester-mass-wood-lathe-machinist-metal-lathe/#comments Tue, 19 Nov 2019 08:33:22 +0000 http://machinisttoolslathe.com/2019/11/19/antique-1800s-p-blaisdell-worcester-mass-wood-lathe-machinist-metal-lathe/










Fresh out of an old estate. It was converted to electric motor and woodworking , has a newer tool rest. Fresh estate shop find. The legs have repairs and one of the feet is replaced as seen in the picture. Someone welded steel to the leg pads on each one in order to bolt it down to the floor. A good welder/metal worker should be able to restore these legs readily. The rest of the machine is in nice shape and includes the jackshaft pulley set with it. Refer to pictures for condition. Bed is 48 long overall… Lathe weighs approximately 350 pounds… Everything heavy cast iron. Pictures are a major part of the description….. Please review them closely on a good size screen. But it varies so much in cost I usually offer it as my second option in the listing. Most items are vintage and previously used unless noted and thus will not be in perfect, new condition. The item “Antique 1800’s P. Blaisdell Worcester Mass. Wood Lathe Machinist Metal Lathe” is in sale since Thursday, October 17, 2019. This item is in the category “Collectibles\Tools, Hardware & Locks\Tools\Machining”. The seller is “mr.wadhams” and is located in Medford, Wisconsin. This item can’t be shipped, the buyer must pick up the item.

• Brand: Blaisdell

]]> https://machinisttoolslathe.com/2019/11/19/antique-1800s-p-blaisdell-worcester-mass-wood-lathe-machinist-metal-lathe/feed/ 0 https://machinisttoolslathe.com/2019/08/21/producto-machine-bridgeport-mass-machinist-tools-lathe-mill-vise-ground-5-12/ https://machinisttoolslathe.com/2019/08/21/producto-machine-bridgeport-mass-machinist-tools-lathe-mill-vise-ground-5-12/#comments Wed, 21 Aug 2019 15:58:52 +0000 http://machinisttoolslathe.com/2019/08/21/producto-machine-bridgeport-mass-machinist-tools-lathe-mill-vise-ground-5-12/











Producto Machinist Vise made in Bridgeport Mass. 5 1/2 Quick Slide. Over 1 fine adjust. This is an extreme quality American made machinist vise. The latch swings for fast adjustment of the long piece, while a fine 1 thread allows for fine tightening. There is some slight surface rust, I oiled with some gun oil and bore cleaner and everything moves super smoothly now. The item “PRODUCTO MACHINE Bridgeport MASS MACHINIST TOOLS LATHE MILL Vise Ground 5 1/2″ is in sale since Sunday, April 14, 2019. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Workholding & Toolholding\Workholding\Vises\Machine Vises”. The seller is “belac1818″ and is located in Warsaw, New York. This item can be shipped to United States.

• Brand: Producto
• Country/Region of Manufacture: United States
• MPN: Does Not Apply

]]> https://machinisttoolslathe.com/2019/08/21/producto-machine-bridgeport-mass-machinist-tools-lathe-mill-vise-ground-5-12/feed/ 0 https://machinisttoolslathe.com/2019/07/03/cnc-lathe-mass-production-turning-by-glacern-machine-tools-2/ https://machinisttoolslathe.com/2019/07/03/cnc-lathe-mass-production-turning-by-glacern-machine-tools-2/#comments Wed, 03 Jul 2019 14:07:06 +0000 http://machinisttoolslathe.com/2019/07/03/cnc-lathe-mass-production-turning-by-glacern-machine-tools-2/ ]]> https://machinisttoolslathe.com/2019/07/03/cnc-lathe-mass-production-turning-by-glacern-machine-tools-2/feed/ 0 https://machinisttoolslathe.com/2019/04/19/cnc-lathe-mass-production-turning-by-glacern-machine-tools/ https://machinisttoolslathe.com/2019/04/19/cnc-lathe-mass-production-turning-by-glacern-machine-tools/#comments Fri, 19 Apr 2019 09:17:43 +0000 http://machinisttoolslathe.com/2019/04/19/cnc-lathe-mass-production-turning-by-glacern-machine-tools/ ]]> https://machinisttoolslathe.com/2019/04/19/cnc-lathe-mass-production-turning-by-glacern-machine-tools/feed/ 0