Month: August 2019
Older Unimat Small Metal Lathe Db200 Machinist Tool

USED, DUSTY, RUNNING, UNIMAT SMALL METAL LATHE. THERE ARE SOME SCREWS MISSING IN THE CARRIAGE AND TAILSTOCK. THE LATHE RUNS AND SOUNDS OK. THE WAYS AND VARIOUS OTHER PARTS NEED TO BE CLEANED AND OILED. THE LATHE NEEDS TO BE CLEANED AND OILED. THERE ARE SCUFFS, SCRATCHES AND WEAR FROM USE. LOOK AT ALL OF […]
The Secret To Cutting A Ball On A Manual Lathe
YUASA MACHINIST TOOL LATHE Machinist Rotary Table

YUASA MACHINIST TOOL LATHE Machinist Rotary. 550 model markings if I read correctly. The width on the one side is 10 inches and the width on the other side is 11 1/4 inches-with a bit of an extruding plate. The item “YUASA MACHINIST TOOL LATHE Machinist Rotary Table” is in sale since Thursday, March 28, […]
NICE USA! No. 5 DUMORE Tool Post Grinder Set with Extra Spindle Machinist Lathe

5 “The Master” Tool Post Grinder Set with an Extra Spindle for Internal & External Grinding along with Case. In good used condition with smoothly rotating spindles and motor. Please see photos as there is wear to paint on grinder as well as the case which also has some areas of rust. 115v motor which […]
MACHINIST TOOLS LATHE MILL Machinist Brown & Sharpe Height Gage Gauge
MACHINIST TOOL LATHE MILL Machinist ROYAL LIVE CENTER for Lathe Number 4 MT DrNK
MACHINIST TOOLS LATHE MILL Kennemetal Carbide Insert Boring Bar B
Atlas Press Co Shop Chart Posters 4 Machinist Lathe Tools Decimal Formulas Set 4

These are not photocopies, but reproductions of the originals. These posters have been professionally digitally edited, retaining some of the slight imperfections of the original Atlas Press Co. Publications from the 1940’s. Professionally printed on 36 lb high resolution coated bond matte poster paper, which is comparable to the originals. Includes the following four poster […]
Vintage STARK Watchmaker Compound Cross Slide Lathe Milling Tool Vise Machinist

Rare vintage STARK TOOL Co. Watchmaker’s compound cross slide metal lathe milling tool with the numbers 1106 and 31 stamped on it. Ove freely but could use some additional lubrication/cleaning to restore to original condition. The item “Vintage STARK Watchmaker Compound Cross Slide Lathe Milling Tool Vise Machinist” is in sale since Sunday, August 25, […]